Xiaomi Poco F3
Overview
The Poco F3 is the direct successor to the F2 line up. This model comes in same body and specs as the recently announced Redmi K40, which includes the latest Snapdragon 870 CPU, a 6.67-inches FHD+ screen with a central tiny-notch, 120Hz refresh and up to 1,300 nit peak brightness.
On the inside, there is Qualcomm’s Snapdragon 870 CPU, a 7nm octa-core 5G Chipset clocked at 3.2GHz, along with Adreno 650 GPU, minimum 6/8GB RAM and 128/256GB internal storage.
As for the camera specs, three lens are lenses are used on the rear of the Poco F3, which includes a 48-megapixel main lens with PDAF and 1/2″ sensor size, a secondary 8-megapixel ultrawide sensor with up to 119˚ FoV and a third 5-megapixel Telemacro lens along with a single LED flash. For selfie, there is a 20-megapixel snapper hidden in the tiny hole upfront.
The device is available in Arctic White, Night Black and Deep Ocean Blue colors. It has a side-mounted fingerprint scanner, support dual Nano-SIMs with 4G/5G SA/NSA support, fueled by a 4520mAh battery with 33W fast charger and run the latest Google Android 11 with MIUI 12 out of the box. The full specs of Xiaomi’s Poco F3 is contained in the table below.
Full Specifications
NETWORK
| Technology Network technology refers to the specific protocols and standards that devices use to connect and communicate with cellular networks. | GSM / HSPA / LTE / 5G |
| 2G Network Bands 2G network bands are specific radio frequencies used for transmitting voice, texts, and limited data in second-generation mobile networks. | GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 |
| 3G Network Bands 3G network bands are specific radio frequencies allocated for third-generation mobile networks. | HSDPA 850 / 900 / 1700(AWS) / 1900 / 2100 |
| 4G Network Bands 4G network bands are specific radio frequencies designated for fourth-generation mobile networks, like LTE (Long-Term Evolution) | LTE band 1, 2, 3, 4, 5, 7, 8, 12, 17, 20, 28, 38, 40, 41, 66 |
| 5G Network Bands 5G network bands are specific radio frequencies designed for fifth-generation mobile networks, offering significantly faster speeds, reduced latency, and increased network capacity. These bands, such as mmWave (millimeter wave) frequencies and sub-6 GHz frequencies enable advanced connectivity for various applications like IoT, augmented reality, and high-definition streaming across diverse global deployments | 5G band 1, 3, 5, 7, 8, 20, 28, 38, 41, 77, 78 SA/NSA |
| Speed Network speed refers to the rate at which data can be transmitted over a network, typically measured in bits per second (bps), kilobits per second (kbps), megabits per second (Mbps), or gigabits per second (Gbps). | HSPA 42.2/5.76 Mbps, LTE-A, 5G |
LAUNCH
| Also Known As This refers to an alternative name of a device in another market, or the model numbers by which the device is known. |
- - |
BODY
| Dimensions Dimensions typically refers to the measurements or physical size of a device. It includes various aspects such as length, width, height, and sometimes thickness or depth, presented in units like millimeters (mm) or inches (in). | 163.7 x 76.4 x 7.8 mm |
| Weight Weight refers to the mass or heaviness of a device, usually measured in units like grams (g) or ounces (oz). It indicates how heavy the device is. | 196 grams |
| Build This refers to the construction, quality, and materials used in manufacturing the product. It encompasses the overall design, durability, robustness, and sometimes the aesthetic appearance of the device. | Glass front (Gorilla Glass 5) |
| SIM Type SIM Type refers to the form or size of the Subscriber Identity Module (SIM) card that a device requires. | Dual SIM (Nano-SIM, dual stand-by) |
DISPLAY
| Display Type Display Type refers to the technology used in the screen of a device. It describes the specific method or technology employed to produce the visual output. | Super AMOLED capacitive touchscreen, 16M colors |
| Size Display size refers to the physical dimensions of the screen on a device, typically measured diagonally in inches or centimeters. It represents the length of the diagonal line from one corner of the screen to the opposite corner. | 6.67 inches, 107.4 cm2 (~85.9% screen-to-body ratio) |
| Resolution Display resolution refers to the number of pixels that a screen can display horizontally and vertically. It's often represented as the total number of pixels in width by height. | 1080 x 2400 pixels, 20:9 ratio (~395 ppi density) |
PLATFORM
| Operating System An operating system (OS) is the software that manages a device's hardware and software resources, providing services for programs to run and enabling users to interact with the device. It acts as an intermediary between users and the device hardware, facilitating tasks like file management, memory allocation, and device communication. | Android 11; MIUI 12 |
| Chipset A chipset is a set of electronic components in a computer or other device that manages data flow between the processor, memory, peripherals, and other hardware components. It serves as a communication hub, coordinating the interactions between different parts of the computer system. | Qualcomm SM8250-AC Snapdragon 870 5G (7 nm) |
| CPU The CPU, or Central Processing Unit, is the primary component of a computer responsible for executing instructions from programs. It performs calculations, carries out logical operations, and manages data, acting as the "brain" of the device. | Octa-core (1x3.2 GHz Kryo 585 & 3x2.42 GHz Kryo 585 & 4x1.80 GHz Kryo 585) |
| GPU A GPU, or Graphics Processing Unit, is a specialized electronic circuit designed to accelerate the creation of images on a screen. It's optimized for handling complex graphical computations and rendering, particularly for gaming, video playback, graphical design, and other visually intensive tasks. | Qualcomm Adreno 650 |
MEMORY
| RAM + ROM RAM, or Random Access Memory, is used by the computer's operating system and software to temporarily store data that is actively being used or processed. It's volatile memory, meaning it loses its stored information when the power is turned off. ROM, or Read-Only Memory, is a type of memory that retains its stored data even when the power is turned off. It contains permanent instructions that the computer uses during startup or booting processes. | 6/8 GB |
| Card Slot A memory card slot is a hardware feature commonly found on various devices such as cameras, smartphones, tablets, and some computers. It's a slot or port designed to accommodate various types of memory cards, including SD (Secure Digital), microSD, CompactFlash, Memory Stick, and others. Users can insert memory cards into these slots to expand storage capacity or transfer data between devices. | No |
MAIN CAMERA
| Camera Type This refers to the camera setup on a device. It could be single, dual, triple, or even more. | Triple Lenses |
| Camera Sensor(s) A camera sensor is the electronic component in a digital camera that captures incoming light and converts it into an electronic signal. It's the core element responsible for recording images. |
Main: 48 MP, f/1.8, 26mm, 1/2", 0.8µm, PDAF Ultrawide: 8 MP, f/2.2, 119˚ Telemacro: 5 MP, 50mm, 1/5.0", 1.12µm |
| Camera Features Camera features encompass a range of functionalities and capabilities offered by a camera, which can vary based on the device's type, model, and intended use. Some common camera features include; Optical Image Stabilization (OIS) High Dynamic Range (OIS), Burst Mode, etc. |
PDAF Autofocus Digital zoom Panorama HDR Touch focus Face detection |
| Video Resolution Video resolution refers to the level of detail in a video image and is typically measured in terms of pixels. It represents the number of distinct pixels that can be displayed in each dimension. Common video resolutions include; HD, FHD, 2K, 4K, and 8K. | 4K@30fps, 1080p@30/60/120/240/960fps, gyro-EIS |
SELFIE CAMERA
| Camera Type This refers to the camera setup on a device. It could be single, dual, triple, or even more. | Single Lens |
| Camera Sensor(s) A camera sensor is the electronic component in a digital camera that captures incoming light and converts it into an electronic signal. It's the core element responsible for recording images. | 20-megapixel punch hole camera |
| Camera Features Camera features encompass a range of functionalities and capabilities offered by a camera, which can vary based on the device's type, model, and intended use. Some common camera features include; Optical Image Stabilization (OIS) High Dynamic Range (OIS), Burst Mode, etc. |
FaceID Face beautification HDR |
| Video Resolution Video resolution refers to the level of detail in a video image and is typically measured in terms of pixels. It represents the number of distinct pixels that can be displayed in each dimension. Common video resolutions include; HD, FHD, 2K, 4K, and 8K. | 1080p@30fps, 720p@120fps |
SOUND
| Loudspeaker A loudspeaker is an electroacoustic transducer that converts electrical signals into sound. It consists of various components like a diaphragm, voice coil, magnet, and enclosure. | Yes, with stereo speakers |
| Speaker Location This simply refers to where the loudspeaker is located on a device. Some common placement includes the rear, basement, sides, and even at the top or within the earpiece grill. | Placed at the basement and top |
| Audio Jack Type Audio jacks come in different types, each with specific sizes and functionalities. Some common ones include a USB-C audio port, a 3.5mm jack, 6.3mm jack. | No |
| Sound Enhancements |
Yes - 24-bit/192kHz audio |
CONNECTIVITY
| USB USB stands for Universal Serial Bus, a standard interface used for connecting various devices to a computer or other compatible host device. USB ports come in different shapes and sizes (such as USB-A, USB-B, USB-C) and have evolved over time to offer increased data transfer speeds and power delivery capabilities. | 2.0, Type-C 1.0 reversible connector, USB On-The-Go |
| Bluetooth Bluetooth is a wireless technology standard used for exchanging data over short distances between devices. It enables devices like smartphones, headphones, speakers, keyboards, and other peripherals to communicate and transmit data without the need for physical wired connections. | 5.1, A2DP, LE |
| Wi-fi Wi-Fi is a wireless networking technology that allows devices to connect to the internet and communicate wirelessly within a local area network (LAN). It uses radio waves to transmit data between devices, such as computers, smartphones, tablets, and other devices equipped with Wi-Fi capabilities. | Wi-Fi 802.11 a/b/g/n/ac/6, dual-band, Wi-Fi Direct, hotspot |
| NFC NFC stands for Near Field Communication, a short-range wireless technology that enables devices to communicate with each other when they're brought into close proximity, typically within a few centimeters. NFC allows for contactless data exchange between devices, facilitating various functions like contactless payments, data transfer between smartphones or other compatible devices. | |
| GPS GPS stands for Global Positioning System, a satellite-based navigation system that provides location and time information to users anywhere on or near the Earth. It uses a network of satellites orbiting the Earth to accurately determine the precise location of a GPS receiver or device. | Yes, with dual-band A-GPS, GLONASS, BDS, GALILEO, QZSS, NavIC |
| FM Radio | No |
BATTERY
| Battery Capacity Battery capacity refers to the amount of electrical charge a battery can store, typically measured in milliampere-hours (mAh) or ampere-hours (Ah). It represents the total amount of energy the battery can hold and consequently determines how long a device can operate before requiring recharging. | Non-removable Li-Po 4520 mAh battery |
| Fast Charging Battery fast charging is a technology that enables devices to recharge their batteries at a much quicker rate than traditional charging methods. It's designed to reduce the time required to replenish the battery's charge significantly. |
Yes, 33W fast charging (100% in 52 minutes - USB Power Delivery 3.0 |
| Wireless Charging Wireless Charging (Inductive Charging) uses an electromagnetic field to transfer energy between two objects. This is usually done with a charging station. Energy is sent through an inductive coupling to an electrical device, which can then use that energy to charge batteries or run the device. | Yes, Quick Charge 3+ |
OTHER FEATURES
| Sensors Smartphones and mobile devices incorporate various sensors that enable them to interact with their environment and provide enhanced functionalities. Some common sensors found in these devices include; an accelerometer, gyroscope, compass, proximity sensor, etc. | Fingerprint (side-mounted), accelerometer, proximity, compass |
| Java Support Java support refers to the compatibility and ability of a device or software platform to run Java-based applications or programs. Java is a widely used programming language known for its platform independence, allowing applications written in Java to run on various devices and operating systems without requiring recompilation. | No |
| Box Contents This refers to items or accessories included in the box of the smartphones. That is items that are available in the box from the device manufacturer. | Charging Brick / USB cable |
